/ / DIY Coat Rack: An Easy Wall-Mounted Idea With Hooks

DIY Coat Rack: An Easy Wall-Mounted Idea With Hooks

Continued…

How to Make a DIY Coat Rack

It is really easy to make a DIY Coat Rack like we did. You just need a long board, some paint, gorgeous decorative hooks and a few simple tools.

Love this idea for a DIY coat rack! It is so easy to make one yourself to hang on the wall by your front door or entry way using this step-by-step tutorial.

What You Need:

Instructions

Just follow these simple instructions. This entire project should only take you a few short hours from start to finish.

1. Prepare the board

We happened to have a long board in our garage that was leftover from another project. One side was rough cut and the other was smooth. We decided the rough cut side would give the coat rack a little style and a bit of a rustic appearance on the wall in our entryway.

The board was already 64 inches long so we didn’t need it cut it down further to fit our space. Kent just ran a router along the edge to make it smoother.

2. Paint the board

You should always use spray paint in a large well-ventilated area. Ideally, we would have done this step outdoors, but it was a little too cold here in Michigan the day we wanted to do this coat rack project.

Fortunately HomeRight sent us an awesome Spray Shelter that we could set up in our garage with the door cracked open several inches.

The Spray Shelter pops up easily like a three-sided tent. While it’s larger than you might need for just a 64-inch board, I can see how the Spray Shelter would be incredibly helpful for large dressers, chairs, furniture and other spray paint projects. It folds up small and comes with its own bag to easily store it away until our next project comes up.

We sprayed the board with several coats of spray paint, allowing time for the board to dry between each coat.

Spray painting a board in the living room

3. Choose where you will install it

This step takes a measuring tape, a pencil, and a trusty dog to supervise you. Kent measured to find and mark the center of the wall with a small pencil mark. 

He also measured up from the baseboard and floor in a few places to mark the height for the coat rack. He then used the level to make sure it would, in fact, be level.

Measuring where to install the board for the coat rack.

4. choose the spacing for the decorative hooks

This part can get a little tricky. We had 7 of the Bungalow Double Coat Hooks from Hickory Hardware and wanted them to be evenly spaced apart.

Starting from the center and then working our way out seemed obvious enough. However, we also wanted to hide the screws that would attach the board to the wall behind the decorative hooks.

We used a stud finder as well to make sure one or more of the screws that goes into the wall would hit a 2×4″ stud. That was an absolute necessity to give the coat rack the strength and stability to hold heavy coats and bags. Once we had all that figured out, we laid out the coat hooks and marked where they should go with a pencil.

Love this idea for a DIY coat rack! It is so easy to make one yourself to hang on the wall by your front door or entry way using this step-by-step tutorial.

5. Attach the board to the wall

Kent used his impact driver to secure the board to the wall in the entryway using two screws. As mentioned in the previous step, we made sure at least one of those screws went into a wall stud. You can see our pencil markings for where we want the decorative hooks to go.

Attaching the board to the wall

6. Install the decorative hooks

Next, he used the same impact driver to attach each of the decorative hooks over the pencil marks. We measured from the bottom of each hook to the edge of the coat rack board to make sure it was centered vertically on the board.

Installing decorative hooks into the DIY coat rack board

The Bungalow Double Coat Hooks came with their own screws to easily attach them to the coat rack.

A close up of decorative hooks for a coat rack

7. Hang any additional home decorations

We centered a nail above the coat rack where I can hang a seasonal wreath. Then on either side of the wreath, we hung framed school photos of our boys.

Love this idea for a DIY coat rack! It is so easy to make one yourself to hang on the wall by your front door or entry way using this step-by-step tutorial.

8. Step back and enjoy Your DIY Coat Rack

We love how great the new coat rack looks in our entryway. You will love it too!

Love this idea for a DIY coat rack! It is so easy to make one yourself to hang on the wall by your front door or entry way using this step-by-step tutorial.

The main floor of our home is an open concept, so you can easily see the coat rack, wreath and photos from anywhere in our living room, dining room or kitchen.

Love this idea for a DIY coat rack! It is so easy to make one yourself to hang on the wall by your front door or entry way using this step-by-step tutorial.

The oil rubbed bronze coat hooks go wonderfully well with all the other oil rubbed bronze knobs, light fixtures and accents we have throughout our home.

Love this idea for a DIY coat rack! It is so easy to make one yourself to hang on the wall by your front door or entry way using this step-by-step tutorial.

What I love the most about the new coat rack though is how quickly people gravitate towards it to hang up their jackets, bags and purses when they arrive. It’s the first thing they do or comment on after they take off their shoes at the front door.

Love this idea for a DIY coat rack! It is so easy to make one yourself to hang on the wall by your front door or entry way using this step-by-step tutorial.

What else should we add to our entryway to make our home more inviting for guest? Please comment below and share. We’re always looking for new ideas.

Love the ideas you see here on Ideas for the Home by Kenarry®? Subscribe today to get our weekly Ideas in Your Inbox newsletter plus other exclusive gifts and offers — all for FREE!

While you’re here, be sure to check out other home decor ideas on Ideas for the Home by Kenarry® –

If you liked this idea for a DIY coat rack, please share it with your friends or pin it for later:

Love this idea for a DIY coat rack! It is so easy to make one yourself to hang on the wall by your front door or entry way using this step-by-step tutorial.

Updated November 2019.

17 Comments

  1. I like the hooks you picked and how you decorated above it. I made one similar to this on a smaller scale and it was so easy!

  2. This looks great in the entryway of your home! I love how simple but elegant it is. It’s so true; no guests ever use the front hall closet in our house either. 🙂 Thanks so much for sharing with #FamilyJoy Blog Linky Party!

    1. Thanks for coming by to see us from your link party, Marisa! I’m glad I’m not the only one who has noticed no one uses the front hall closet.

      1. My question is…… how to you mount this rack on the wall? I’ve made the coat rack, but don’t know how to attach/hang on the wall. Pls advise. Thanks so much……

        1. Hi Deborah,
          Great question! We used two screws to mount the coat rack on the wall. We made sure one of those two screws went into a wall stud so it would be held securely in place. Then we put the decorative coat hook hardware on top of these mounting screws to hide them.

          You’ll see a photo of it under Step 5 on page 2 of this tutorial – https://kenarry.com/diy-coat-rack-tutorial/2/

          Hope that helps! Let us know if you have any other questions. We’d also love to see a photo of how your coat rack turned out.

          Have a great weekend!

          Best wishes,
          Carrie
          Ideas for the Home by Kenarry®

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.