Go Back
Print Instructions Pin for Later
No ratings yet

Wooden Candy Corn

Create this wooden candy corn from 3/4 inch plywood and have a fun, rustic Halloween display.
Prep Time10 minutes
Total Time50 minutes
Author: Amy Lanham
Cost: 20

Equipment

  • 1 Cricut or printer and scissors
  • 1 Jigsaw
  • 1 Paint Brush
  • 1 Sander with 120 grit sandpaper

Supplies

  • 1 piece 3/4 inch Plywood
  • 1 Apple Barrel Harvest Orange Paint or any orange paint
  • 1 Apple Barrel Golden Yellow Paint or any yellow paint
  • 1 White paint optional
  • Tape
  • PNG or SVG of Candy Corn shapes

Instructions

  • Cut out the candy corn shape with a Cricut on vinyl or print on paper and cut out the shape. You should have 11.5", 9", and 6" tall shapes.
  • Stick the vinyl to your wood and cut, or tape the paper and trace the shape, then cut out the shape.
  • Sand down the edges of the wooden candy corns so they are smooth.
  • Tape off the orange part of the candy corn and paint. Paint the edges, and the back too. Each color should be about a third of the candy corn.
  • Once the orange is dry, paint the yellow. Then paint the white, or leave the top the natural wood color for a more rustic feel.
  • Once dry display!
Did you follow these steps?Tag us on Instagram at @kenarryideas or leave us a comment rating below.